放大器厂家
放大器厂家放大器产品型号:XJC-FD-DC
放大器厂家放大器特点 Feature◆内置多级放大芯片,独立电源供电给传感器工作。
◆多种灵敏度输入,可以切换。
◆放大器厂家放大器调节零点,增益在外部调节,更加方便快捷。
◆高速度,变送速出,动态响应频率高。
◆放大器厂家放大器长期稳性好
◆体积小巧,安装方便
◆ Built-in multistage amplifier chip, independent power supply for sensor.
◆ Multiple sensitivity input, and switchable.
◆ Adjustable zero and external gain adjustment, more convenient.
◆ High speed, high transmission speed, and high dynamic response frequency.
◆ Good long-term stability
◆ Small size and easy to install
技术参数:
精度 Accuracy |
0.1%-0.05% F.S. |
输出 Output |
0-5V,0-10V,-5~+5Vor4-20mA |
使用电压 Service voltage |
12VDC 24VDC |
最大使用电压 Maximum service voltage |
36V |
非线性 Non-linearity |
0.1%-0.05% F.S. |
温度补偿范围 Compensated temp range |
- 10 ~ 60 ºC |
滞后 Hysteresis |
0.1%-0.05% F.S. |
工作温度 范围 Operating temp range |
- 20 ~ 80 ºC |
重复性 Repeatability
|
0.1%-0.05% F.S. |
绝缘电阻 Insulation
|
≥5000MΩ/100VDC
|
零点输出 Zero balance |
± 2% F.S. |
零点温度漂移 Temp effect on zero |
0.05 % F.S. / 10ºC |
电缆线尺寸 Cable size |
∅5 x1.5m |
动态响应
|
50-2000次/秒 50-2000 times per second |
电缆线连接方式 Cable connection |
Ex + : 红 Red; Ex - : 黑 Black; Sig + : 绿 Green; Sig - : 白 White |
||
主要应用 Applications |
可与各种电阻应变式、陶瓷压阻式、扩散硅压阻式传感器配套使用,实现对力、压力、重量、位移、扭矩、液位等物理量转换变送。可与我公司研发生产的各种传感器配套使用,其信号可直接输入计算机或测控仪表。 Voltage transmitter can work together with strain gages, ceramic piezoresistive sensors, and diffused silicon piezoresistive sensors which can realize the conversion and transmitting of physical quantity, such as force, pressure, weight, displacement, torque and liquid level. And the signal can be directly input in computers or other measurement and control instruments. |
选型说明Ordering guide:
型号(MDL):XJC-FD-DC
量程(CAP):50HZ-2KHZ可选
输入信号(Input Signal):V05:0-5V
V10:0-10V
V+/-05:+/-5V
V+/-10:+/-10V
M4:4-20mA
M20:0-20mA
精度(Accuracy ) :D:0.1%-0.5%
B:0.05%
特殊需求(Special Requirements):N:有特殊需求
没有特殊需求可以不写
来源:http://www.szxjc18.com/supply/33.html
发布时间 : 2018/3/25 0:00:00